5 Quick & Handy Tips for Transducer Maintenance


Sonar transducers are considered to be one of the most valuable things on your vessel. With one and a fishfinder display, you can see the real depth to remain off reefs, find wrecks for diving and finding fish. However, without your transducer without well, you won’t be able to make the most of your fishing adventure. Here are the means by which you should think about your transducer performance and ensure its life.

1:- Paint Protection

In the event that you slip your vessel rather than trailering the boat, the ­transducer-face surfaces need to be painted using anti-fouling paint so the growth of marine development and other issues is reduced. Use water-based fouling-free paint, since ketone-based paints can affect numerous sorts of the plastics used to encase the transducer’s components.

2;- Keep It Perfect, Clean

At regular intervals, utilize a delicate fabric and mellow household unit cleanser to wash the transducer face and keep it free of marine development. In instances of outrageous fouling, tenderly utilize a Scotch-Brite scrubber.

3:- Try not to Run It Dry

Multi-component CHIRP transducers produce significant warmth, thus they should be submerged in water while working to keep cool. This is a worry essentially for trailer boaters who may leave the sonar on subsequent to putting the vessel on the trailer. So turn off the sonar before dragging the vessel out of the water.

4:- Check for Leaks

Normally check for holes inside the bilge or whatever another compartment where a thru-hull transducer is introduced. This is especially significant with a recently installed transducer. Recheck each a few hours for the main day or two after the installation. In the event that there is a break, pull the boat as quickly as time permits and have it fixed to keep any mishaps away.

5:- Cable Guy

Occasionally, review the transducer connectors for indications of attrition, and investigate the link for cuts in the insulation. In the event that the insulation is harmed and the inner channels are doing fine, enable the link to dry, fill in the harmed region with marine sealant, and afterward spread the affected region with electrical tape. In case the wires inside are harmed, cut the link and utilize partially waterproof junction box to engraft the two segments together.

Transducers play a key role in defining the nature of your voyage. There are different categories of transducers available in the market these days. You just need to compare them well and consider the one that would best suit your needs. From transom mount to thru-hull and in-hull transducers – the choices are many.

It all depends on your specific marine needs, budget, personal preferences, and boat type which model you finally go with. The majority of boaters opt for transom mount transducers given they are comparatively easier to install, cheaper, and come with enough output. However, what makes the difference is how much you care or look after your unit.

Like other best marine electronics, transducers also need consistent maintenance and upkeep. So it’s better that you invest your money on a model that is compatible with your fishfinder, easy to use, and requires least maintenance or repair.